HDL 4CH 7A RGBW Driver

Product code: 20523720 // MPN: M/DRGBW4.1

€139,20 (inc. VAT)

Available from 1 to 3 days

Add to wishlist

HDL KNX Standalone Power Interface with 3CH 10A Relay for Tile Series

Code: 20521320

€170,88

Available from 1 to 3 days

KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, each channel has the output capacity of 7A.The four channels can be controlled separately or using RGBW combination control. PWM linear dimming can set the dimming response time and the upper and lower limits of the dimming. The dimming is stable and diversified to meet the needs of different occasions.

PWM liner dimming
Dimming lower / upper limit setting
Dimming fade time setting
1 bit switch state response
1 byte brightness state response
3 bytes RGB color response *
State recovery after power on
Staircase light
Flashing light
Scene function (10 scenes supported for each channel)
Logic function
Threshold value
Up to 5 sequences, with 24 steps for each
Custom on/off *
Color selection and transformation for combination mode *
The polarity protection function of DC power supply will prevent from destroy the device when the positive and negative electrodes are connected in reverse.
Note: * Only for RGBW combination mode.
Dimensions 183mm×84mm×39mm

Net weight 212g

Housing material ABS, PC, Aluminum

Installation Fixed with screws

Protection rating (Compliant with EN 60529) IP20